Prepare Logtag(S) For Next Use - LogTag Analyzer Temperature Recorder User Manual

20 LogTag Analyzer User Guide (2.0)
in more detail in the chapter "Preparing LogTag for use on page 26". Click to
record the configuration data and you will see the final confirmation screen.

Prepare LogTag(s) for next use

The last Wizard screen involves sending the new configuration data to each LogTag to
prepare them for their next use. While the software is sending the new configuration data
to each LogTag the top of the window will look similar to the following picture. The
process of sending the new configuration data to each LogTag should take less than 20
seconds in total to complete.