Configure Logtag(S) For Next Use - LogTag Analyzer Temperature Recorder User Manual

Chapter 3 Quick Start Guide 19
The communication ports that are not in use (the ones that initially are reported with the
mark) can be removed from view by selecting an option (see "Communication Ports"
on page 113). You don't have to do that now, but you can do it later to clean up the
"wizard window" appearance.
To get to the next screen, click on and the third wizard step screen will
appear. The software will automatically proceed to the next wizard step, as if the user
clicked on , if each of the Interface Cradles detected have a LogTag detected
in them and the information within the LogTag was successfully retrieved.

Configure LogTag(s) for next use

The options are available so you have appropriate control over the way the LogTags will
behave and store data for the upcoming period of recording. These options are explained