Saving Logtag Data; Saving Logtag Data Files; Saving A Multi Chart File - LogTag Analyzer Temperature Recorder User Manual

Saving LogTag Data

Saving LogTag Data files

Every time you download a LogTag Recorder to your computer the data are automatically
saved into a file with a *.ltd file extension (LogTag Data). This type of file is unique to
LogTag data loggers and can only be read by LogTag Analyzer software.
You can:
generate a name for this file, which contains certain key details about the unit

Name on page 106)
decide if existing files with older data should be overwritten or kept

page 108)
automatically send files to e-mail recipients and FTP sites

automatically export data to other file formats

save all or part of the data to make them accessible to other users
files on page 50 and
Please refer to the respective sections in this user guide for more information.

Saving a Multi Chart file

If the main LogTag Analyzer window currently displays a Multi-Chart as explained in
Combining charts onto a single chart
by clicking on the
(on page 119). Select a file name and location for your Multi Chart file. The file extension
for Multi Chart files is "*.multi".
Note: The Multi Chart file should be saved in the same folder as the individual data files.
If any of the data files referenced in a Multi Chart file are renamed, deleted, or moved to
a different folder, the Multi Chart configuration cannot be displayed.
The configuration file contains information about the data files included in the Multi Chart
display, the subtitle, chart colors, and time offset when
"Combining charts onto a single chart" on page 64).
Any annotations added to the Multi chart display are saved in a separate annotation file
with the file extension ".anno". This file must be located in the same folder as the Multi
Chart file to be included in the Multi Chart display.
To open a previously saved Multi Chart configuration file, click on the
select the "Open..." command
file to be opened.
PDF files on page 52).
(on page 64), you can save the current configuration
toolbar icon or selecting the "Save" command from the
from the File menu (on page 119), then select the "*.multi"
Chapter 5 Results from LogTag
(Automation
(Exports and Reports
Shifting chart start times
49
(File
(Uniqueness on
on page 92)
on page 109) and
(Selected LogTag
File menu
(see
toolbar icon or