Settings; System Settings - Strong SRT 5432 User Manual

2. Menu->EDIT CHANNEL -> User Channel List->Load User Data
5. Settings

5.1 System Settings

Menu->SETTINGS->System Settings
Tip: VOL+/VOL- .
You can set all the settings here by pressing button
1. Menu Language: Set the menu language.
2. Audio1: Set the preferred audio language.
3. Audio2: Set the sub-prime audio language.
4. Subtitle Language: Set the subtitle language (if available)
5, Subtitle control: Select ON to view subtitles or select OFF to disable them.
6. EPG Language: Set the EPG language.
7. LCN: LCN lock switch – locks channels in logical channel number
8. Digital Audio: If a channel has AC3 and PCM audio language at the same
time, when you select RAW it will set AC3 audio language as default output
and when you select PCM it will set PCM audio language as default output
automatically when you highlight the channel. If you set OFF, in the channel list
when you highlight the channel, you should press the OK button to play it.
9. Auto Channel Selection: If you set ON, in the channel list will play
automatically when you highlight the channel. If you set OFF, this function is
not available.
10. Auto Exit CH List: If you set ON, the channel list will disappear when you
press OK on a Highlighted channel. If you set OFF, it will not.
11. Source signal type：Choice source signal type of T or T2.
12. Recall List: If you set ON, when you press Recall button of RCU you can
get the recall list. If you set OFF, when you press recall button you can go back
to the last program you have selected.
13. Low power standby: switch to low power standby.
13