Auto Scan; Antenna Power Setting; Factory Default; Edit Channel - Strong SRT 5432 User Manual

3.2 Auto scan

Auto scan function would empty all sevices in STB database at first. Then
scan the frequencies one by one, which are stored in the default frequency
table corresponding to current "Country Setting".
(1) Press <OK>.will appear a choice to network search yes or no.
(2) Press <OK> start auto scan whether network search yer or no.

3.3 Antenna power setting

This is DVB T2 5v control – for passive antennas, please set it to OFF. If
active antenna, off or on does not matter.

3.4 Factory Default

You can restore the product to the factory default and you can also set it up
according to the wizard.
1. Menu->INSTALLTION -> Factory Default
2. Input the password (default password is 0000)
3. Highlight the option you want and press the OK button to execute it.
Tip: If you select "yes", all data and settings will be lost.

4. Edit Channel

In the Channel menu, you can edit the channels that you want to play in the
Normal Play mode. The functions available here include TV channel editor,
Radio channel editor.

4.1 TV/Radio Channels

Menu->EDIT CHANNEL->TV/Radio Channels
11