Hanger (L/R); Housing Cap (L/R) - Sony MDR-NC60 Service Manual

Noise canceling headphones

Hide thumbs Also See for MDR-NC60:

Table of Contents

MDR-NC60

2-5. HANGER (L/R)

Note: Use the same method as that on the L side when removing the hanger (R).

2 two screws

6 hanger stopper (L)

3 swivel spring

4 swivel plate

5 Rotate this part of hanger

so that it comes to the

position shown,

and then remove from the

hanger stopper.

7 hanger (L)

1 Remove the cord from the

groove in the hanger.

Note: Use the same method as that on the L side when removing the housing cap (R).

front plate (L) assy

4 two cap housing adhesive sheets

Note: Cap housing adhesive sheets cannot re-used.

Please replace to brand-new part ones

cap housing adhesive sheets is removed.

head band section

POINT TO NOTES

slider

Never draw out the cord

when the slider is extended.

The cord may be drawn out

when the slider is not extended.

1 screw (B1.4)

2 Pull up the housing cap (L) from the side

where the screw was removed.

3 housing cap (L)

Table of Contents