Operation Section - Toshiba RBC-AX23UW-E Owner's Manual

Wireless Remote Controller Kit

Operation section

Push each button to select a desired operation.
• The details of the operation needs to be set up once, afterward, the air conditioner can be
used by pushing ON/OFF
1
Mode button
Selects desired operation mode.
2
Fan speed button
Selects a fan mode.
3
Timer set button
Used to setup the timer. (See page 8)
4
ACL button
Use this button after battery exchange.
5
Setup temperature button
Adjusts the set point.
Select the desired set point by pushing
.
only.
1
2
3
4
ACL
or
5
6
ADR
7
SENSOR
6
ON/OFF button
When the button is pushed, the operation
starts, and it stops by pushing the button
again.
When the operation has stopped, the
operation lamp and all the displays disappear.
7
Filter button
This function is not available.
OPTION :
Remote controller sensor
Usually the temperature sensor of the indoor
unit senses the temperature.
The temperature on the surrounding of the
remote controller can also be sensed.
For details, contact the dealer from which
you have purchased the air conditioner.
– 6 –
Owner's Manual
EN
6-EN