Table of Contents
Advertisement
STEP 34
NOTE: Refer to TQLP Assembly instructions
for assembly of the TQLP LEG PRESS.
MAINTENANCE
Guide Rods - Clean and lubricate with a sili-
con or Teflon based Lubricant.
Nuts and Bolts - Tighten and/or adjust as
needed.
Cables - check tension, end fittings, and coat-
ing. Replace if damaged or worn. Check
locking nuts at cable ends. (Note: New cables
always stretch during use. Refer to step 30 for
adjusting tension.)
Pull pins - Check that pins fully engage when
released. Tighten pull pin nuts as needed.
Frame - Wipe down and dry. Polish and wax.
Upholstery - Wipe down and dry after use.
Clean and condition periodically.
Grips - Inspect and replace if they appear worn
or damaged.
1
2
3
4
5
6
Page 39
Hide quick links:
Advertisement
Table of Contents
