Torque Fitness TQ5-001 Assembly And Maintenance Manual page 23

STEP 18
Route the ball end of WEIGHT STACK CABLE
(64) thru the hole in the STACK SHROUD
SUPPORT (30) and around the 6" PULLEY in
the TOP BOOM (17) as shown.
Loop the ball end of WEIGHT STACK CABLE
(64) around the upper PULLEY in the DUAL
FLOATING PULLEY (34) as shown.
Assemble one 3-1/2" PULLEY (59) to the TOP
BOOM (17) using:
One 3/8 X 1-3/4" BUTTON HEAD BOLT (720)
One 3/8" LOCKNUT (15)
Two 3/8" FLAT WASHERS (3)
Route the ball end of WEIGHT STACK CABLE
(64) around the 3-1/2" and 4-1/2" PULLEYS in
the TOP BOOM (17) as shown.
NOTE: Make sure the cable runs in the
groove of the pulleys and to the inside of
the cable retaining brackets.
59
72
3/8 X 1-3/4"
34
1 2
6" PULLEY
59
17
3
3 4
15
4-1/2" PULLEY
30
64
5 6
Page 23