Switching On/Off - Mercedes-Benz CLS Operator's Manual

Hide thumbs Also See for CLS:
Table of Contents

Advertisement

X
To switch on: press button ; once or
twice until the desired level is set.
One or two indicator lamps in button ;
light up.
X
To switch off: press button ; repeatedly
until all indicator lamps in button ; go out.
Massage function (PULSE)
The massage function helps you to prevent
muscle tension on long journeys. You can
choose between two levels.
X
To switch on: press button ? once or
twice until the desired level is set.
One or two indicator lamps in button ?
light up. The air cushions in the lumbar
region vibrate for approximately 20
minutes.
Adjusting the four-way lumbar
support
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
To raise the backrest contour
:
To soften the backrest contour
;
To lower the backrest contour
=
To harden the backrest contour
?
6
Canada only.
Switching the seat heating on/off

Switching on/off

G
WARNING
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3 repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
i
If the battery voltage is too low, the seat
heating may switch off.
Driver's and front-passenger seat
6
Rear seats
The system automatically switches down
from level 3 to level 2 after about eight
minutes (driver's seat and front-passenger
seat) or five minutes (rear seats).
I n f o r ma t i o n P r o v i d e d b y :
Seats
97
Z

Advertisement

Table of Contents
loading

Table of Contents