Mercedes-Benz CLS Operator's Manual page 143

automatic transmission directly from D to
R, from R to D or directly to P. The
automatic transmission could otherwise be
damaged.
HOLD function or DISTRONIC PLUS: the
automatic transmission automatically
switches to transmission position P if the
vehicle is braked by the HOLD function or
DISTRONIC PLUS. In addition, at least one of
the following conditions must be fulfilled:
the engine is switched off.
R
the driver's door is open and the seat belt
R
is not in the buckle.
Engaging parking position P in AMG
vehicles
X
If the vehicle is stationary, press P
button :.
Engaging reverse gear R
! Only shift the automatic transmission to
R when the vehicle is stationary.
X
When the vehicle is stationary, depress the
brake pedal.
X
Push the DIRECT SELECT lever up past the
first point of resistance.
Neutral N with ECO start/stop function
activated
The ECO start/stop function switches the
engine off automatically if the vehicle is
braked to a standstill when in neutral N and
the brake is still depressed.
Automatic transmission
For further information on the ECO start/stop
function ( Y page 135).
Shifting to neutral N
X
When the vehicle is stationary, depress the
brake pedal.
X
Push the DIRECT SELECT lever up or down
to the first point of resistance.
If the engine has been switched off, the
automatic transmission automatically
switches to N.
Remaining in neutral N
If the automatic transmission is to remain in
neutral N, e.g. for washing the vehicle in car
washes with a towing device, please observe
the following instructions:
G
WARNING
When leaving the SmartKey in the starter
switch, do not leave children unattended in
the vehicle. It is possible for children to switch
on the ignition which could result in
unsupervised use of vehicle equipment.
Unsupervised use of vehicle equipment could
result in an accident and/or serious personal
injury.
Using the SmartKey:
make sure that the ignition is switched on.
R
when the vehicle is stationary, depress the
R
brake pedal and keep it depressed.
shift to neutral N.
R
release the brake pedal.
R
if applied, release the parking brake.
R
switch off the ignition and leave the
R
SmartKey in the ignition lock.
Using KEYLESS-GO:
make sure that the ignition is switched on.
R
when the vehicle is stationary, depress the
R
brake pedal and keep it depressed.
engage park position P.
R
release the brake pedal.
R
remove the Start/Stop button from the
R
ignition lock.
I n f o r ma t i o n P r o v i d e d b y :
141
Z