Attaching Displays; N-Drive Cage - Storage Kit - Magma ExpressBox 3T EB3T User Manual

Thunderbolt to pcie expansion
Table of Contents

Advertisement

Attaching Displays

You can use an appropriate Display Port connector to add a Display Port, HDMI, DVI, or VGA Display.
The Display Port connector can plug into the other Thunderbolt port on ExpressBox 3T
Make sure your display is plugged in and the appropriate adapter is connected.
N-DRIVE CAGE – STORAGE KIT
The standard EB3T does not have an internal storage drive. Should you need one, you can either buy the EB3T-DB
model or purchase the N-Drive Cage, which provides users with the ability to add (4) 2.5" hard drives to an
ExpressBox 3T. Magma N-Drive Cage is a "Storage Kit" as shown from the picture below for storage drives
upgrade.
The "Storage Kit" is composed of the following items:
1. 3mm Centering Screws.
2. 3mm Panhead Screws.
3. PCB Interface.
4. 4pin molex-to-4pin Mimi power cable.
SAS / SATA Cable.
5.
6.
Drive Bay with 4 drive trays
NOTE
PCIe Controller Card and Drives are not included with the storage KIT
ExpressBox 3T | Chapter 4 Technical Information
Magma
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Expressbox eb3t-db

Table of Contents