Install Pcie Cards - Magma ExpressBox 3T EB3T User Manual

Install PCIe Cards

Some card manufacturers recommend that you install their software driver prior to installing the card. If this is the case, be sure
to install the card driver before connecting ExpressBox 3T to the computer.

Slot 1 accepts x1 or x4 PCIe cards or the provided Fan Blower

Slot 2 accepts x1, x4 or x8 PCIe cards

Slot 3 accepts all types of PCIe cards x1, x4, x8 or x16 (next to Thunderbolt interface card)
Make sure that all cards are fully seated in their connectors. When correctly seated, there will be a firm resistance when you
pull up gently on the card. To keep the cards in place, secure them in the enclosure with their retaining screws.
After securing the cards verify that they do not touch each other.
ExpressBox 3T | Chapter 2 Hardware Installation 11
Magma