Connect Thunderbolt Cables; Start Host Computer - Magma ExpressBox 3T EB3T User Manual

Magma

Connect Thunderbolt Cables

Attach Thunderbolt cable into either top or bottom port on the ExpressBox 3T. Plug in Display Monitor, DVI/HDMI,
or Display. If no display will be used, you can daisy chain other Thunderbolt devices. Plug in the other end of the
Thunderbolt cable to the Thunderbolt port on the computer.

Start Host Computer

ExpressBox 3T will automatically turn ON when the computer is turned ON. A BLUE light will shine when the expansion chassis
is ON. ExpressBox 3T will automatically turn OFF when the computer is turned OFF or goes into SLEEP mode.
If either end of the Thunderbolt cable is removed while the system is ON, the expansion chassis will automatically power down.
The Blue light on the front of ExpressBox 3T is not an on off push button, it simply indicates whether the chassis is on or off. If
either end of the Thunderbolt cable is disconnected, ExpressBox 3T will automatically turn off.
ExpressBox 3T | Chapter 2 Hardware Installation 14