Table of Contents
Advertisement
11 : teMpo
PRESET TEMPO
Normally, the system tempo is global, which means it stays the same as you change presets, but in fact, any
preset can have its own tempo which takes over the system tempo while that preset is loaded.
To give a preset its own built-in tempo:
1. Load the preset.
2. Tap once on the TEMPO footswitch.
3. Change
TEMPO TO USE
4. Set the tempo as desired using any method.
5. Save the preset.
Your new "Preset Tempo" will automatically take effect when the preset is loaded. The global tempo remains
in the background and will be used again when you load a new preset with TEMPO TO USE set to "GLOBAL".
AUTO DELAY
When you set this parameter to "ON, " any DELAY blocks that are bypassed will become active whenever
a new tempo is tapped in. This allows you to set the tempo and engage your delay block(s) from a single
footswitch.
THE METRONOME
The FX8 features a built-in metronome whose signal is mixed in at Output 1.
– Turns the metronome on or off.
METRONOME
– Sets the level of the metronome from -20dB to +20dB.
METRO LEVEL
to "PRESET".
56
Hide quick links:
Advertisement
Table of Contents
