Preset Tempo; Auto Delay; The Metronome - Fractal Audio AX8 Owner's Manual

9 teMPo

PRESET TEMPO

Normally, each preset has its own saved tempo, which takes effect when you load the preset. You can also
change presets to use the Global Tempo so the tempo stays the same when you load them.
To change a preset to use the Global Tempo:
1. Load the preset.
2. Tap once on the TEMPO footswitch (or open the TEMPO area of the "Config" page of the main menu.)
3. Change
TEMPO TO USE
4. Save the preset.
Your new "Preset Tempo" will automatically take effect when the preset is loaded. The global tempo remains
in the background and will be used again when you load a new preset with TEMPO TO USE set to "GLOBAL".

AUTO DELAY

When you set this parameter to "ON, " any DELAY blocks that are bypassed will become active whenever a new
tempo is tapped in. This allows you to set the tempo and engage your delay block(s) from a single footswitch.

THE METRONOME

The AX8 features a built-in metronome whose signal is mixed in at Output 1.
Turn it on or off in the TEMPO menu.
– Turns the metronome on or off.
METRONOME
– Sets the level of the metronome from -20dB to +20dB.
METRO LEVEL
to "GLOBAL".
72