Global Looper Location - Fractal Audio FX8 Owner's Manual

GLOBAL LOOPER LOCATION

In terms of signal flow, the Looper can be positioned in several different locations. It defaults to IN PRE —
before any PRE effects. You can move the looper per preset, or globally.
TO CHANGE THE GLOBAL LOOPER LOCATION...
 Press the SETUP button. Press Footswitch 1 to open the
 Navigate to
LOOPER LOCATION
ƒ IN PRE – (Default) The looper is positioned just after the IN PRE jack, before any PRE effects.
No effects are recorded, but any effects you turn on will be heard to process the looper.
ƒ OUT PRE – The looper is positioned after PRE effects just before the OUT PRE jack.
PRE effects are recorded into the looper.
ƒ OUT POST – The looper is positioned after POST effects just before the OUT POST jack.
PRE and POST effects are recorded into the looper.
ƒ NO LOOPER – The looper is disabled, resulting in a slight CPU usage decrease.
Note that any individual preset can override the global setting for
 If you disable the looper globally, you may wish to change the behavior of the LOOPER/
TRUE BYPASS footswitch so a single quick tap engages or disengages True Bypass.
ƒ Press SETUP
ƒ Press Footswitch #1 to show the
ƒ Navigate to
ƒ Use the VALUE knob to change TAP/HOLD to HOLD/TAP.
TO CHANGE THE LOOPER LOCATION FOR A SINGLE PRESET...
The Looper location can also be changed per-preset, overriding the global setting. The
parameter is on of the Looper edit menu. It offers the same options as the global
PAGE2
parameter (above). One additional option, "GLOBAL" causes the preset to use the GLOBAL setting for
. Setting a particular preset to NO LOOPER leave slightly more CPU power for other
LOOPER LOCATION
effects.
. Use the VALUE knob to select the desired setting:
GLOBAL
SHOW LOOPER/ENGAGE BYPASS .
59
menu.
GLOBAL
LOOPER LOCATION
menu.
12 : tHe Looper
(see below).
LOCATION
LOOPER LOCATION