Vox Delay; Vox Beep - Alinco DJ-A10 Instruction Manual

SET MODE OPERATIONS

VOX Delay

This is to make a time delay at the end of VOX transmission. When you stop speaking to take breath,
the radio still holds the transmission for the time you set in this menu.
1.Press and hold 【 PF2 】 key while turning on the radio, and keep pressing
【 PF2 】 key for 3 seconds to enter into the Set Mode operations.
2.Press 【 B 】 / 【 C 】 key to choose the Menu 4 and display " VOXDEY ".
3.Press 【 A 】 key then press 【 B 】 key or 【 C 】 key to choose the parameter, that is from 0.5 to 5
seconds in 0.5 seconds step. Default is 2 seconds.

VOX Beep

After enabling this function, beginning transmitting by VOX, the transceiver will beep.
1.Press and hold 【 PF2 】 key while turning on the radio, and keep pressing
【 PF2 】 key for 3 seconds to enter into the Set Mode operations.
2.Press 【 B 】 / 【 C 】 key to choose the Menu 5 and display " VOXTON ".
3.Press 【 A 】 key then press 【 B 】 key or 【 C 】 key to choose the parameter.
ON: VOX beeping is enabled.
OFF: VOX beeping is disabled. Default setting is OFF.
47
Professional
FM Transceiver