About The Procedure Of Full Automatic Wash Program - Midea MFW-1250MV2 Owner's Manual

About the procedure of full automatic wash program

Program
Wash time Rinse times
Standard 20 minutes two times
Quick
3 minutes
Soak50 minutes
Jeans two times
Wash 6 minutes
Anti-crease 9 minutes two times
Soak50 minutes
ECO
Wash 6 minutes
Air dry
Spin time
Total time
5 minutes 64 minutes
one time 3 minutes 23 minutes
6 minutes 94 minutes
1 minute 41 minutes
one time 6 minutes 88 minutes
55 minutes 60 minutes
15
Cleaning and Maintenance of the washing machine
End of program
The washing machine will send off the sound
of dou-dou at the end of any program operation " "
to remind you to take out the laundry or operate
it again.
After the sound ,the washing machine returns
to its power-off state with no display and all lights off.
Please shut off the tap, pull out the plug when not
in use to avoid water leakage or the fire accidents.
Clean the water inlet
After long time use the water inlet mesh bag may
be blocked with smudginess and should be cleaned
according to the following steps
1 Switch on the power followed by shutting off the tap
2 Let the washer works for 5 seconds so that water
flows into the tub through the water inlet hose then
turn off the power
3 Unload the water inlet hose and clean the mesh bag
then restore the water inlet assembly
Clean the lint filter in the drain pump (only for having drain filter)
1. Drain the water out of the 2. Loosen the pump cover
pump,under which use a anticlockwise.
container to collect.
4. Clean the filter. 5. Restore it and adjust the
convex place to align at
the pump hole.
Notes:
If the drain filter is not cleaned at proper time (every 10 times of use),Drain problem could be caused.
Maintenance
Use gentle clothing to wipe off the water and dirt on
the surface each time after using the washing machine.
Detergent , propellant and
other chemicals are not
allowed to use so as to avoid
any damage to the plastic
accessories.
Clean Of the filter
After using the washing machine for a period please clean
it according to the following steps
1 Take out the lint filter
2 Open the filter and wash it clean in the water
3 Restore it and fix it
(only for magic filter)
After using the washing machine for a period, clean it
according to the following steps:
1. Take off the lint filter.
2. Turn over the mesh bag and wash it clean in the water.
3. Restore and fix it.
(only for normal filter)
3. Take out the lint filter.
6. Tighten the pump cover
clockwise.
16