Advertisement
Special features
Delay time program
Delay time means the preset beginning
time of washing.
1.Switch on the power .
2.Open the tap and lay the drain hose.
3.Put in the laundry and detergent.
4.Select the proper water level according
to the quantity of clothes.
5.Select the functions and programs.
6.Press "DELAY" button to select the
beginning time of washing.
7.close the lid and press "START/PAUSE"
button.
Confirmation of the delay and inspection
1. After the delay function is started, the corresponding delay light will flash, and other lights
are turned off.
2. After the delay function is started , press " Delay" button continuously , you may inspect
the preset program and function . Loose the button , the program return to delay status.
Cancel the delay time, or alternate the delay time
1. Press " Power" button to cancel the delay time.
2. To change the delay time , cancel the delay time first ,
and then press "Delay" button to reset.
Quick
Wash time is short. Suitable to wash light stained clothes and clothes in summer.
ECO
1 time rising is suitable for light contaminated clothes in order to save water.
Jeans
High wash ability, suitable to wash heavy or serious stained clothes.
Anti-crease
The wash time is short ,rinses many time with high water level ,thoroughly wash
away the garment.
Air dry
As for not easily fading ,deforming , and non-waterproof clothes , can use the function to
dry clothes without heating, and to reach the result of being dried in a room.
Child lock
Press the "Water level" and "Spin"at the same time to lock buttons on control panel.
Press the "Water level" and "Spin"at the same time again to unlock buttons.
Press t he " D ELAY" b utton e ach t ime,
the n umber o n the d igital i ndication
adds b y "1" ; After the n umber
reaches " 24",press t he " D ELAY"button
each t ime , t he n umber a dds b y "6" ;
After t he n umber reaches 4 8, t he l ight
of d elay t ime i s turned o ff , a nd t he
delay p rogram return to original status.
13
Special features
Function of automatic power shut off
1. If the machine do not start to work within 10 minutes after powered on, it will power off automatically.
2. After end of operation and the buzzer sounding 6 times, it will power off automatically.
Function of adjusting for imbalance
1. If the laundry is placed uneven before spinning, it is likely to cause vibration during spinning. The
washing machine has a function of adjusting imbalance. When working,the washing machine always
inspects operation state automatically. If the spinning vibration is too great, the washing machine
automatically starts the adjusting program to balance.
2. When the machine adjusts imbalance, rinse light will flash, and the machine will start to inject water
to set water level. The machine adjusts imbalance automatically for about 1 minute, then drains water,
returns to original spinning state. If the washing machine can adjust the imbalance twice. If the
adjustment has no function, it will alarm.
Fuzzy control function
Standard procedures default implementation fuzzy control function. After startup,
such as water level before starting the keys will be cancelled automatically
according to the fuzzy control functions;
there is no water, tub fuzzy measurement, the water level directly as the default
file namely 6 gear levels.
Fuzzy control function is at boot automatically after the determination of cloth is
measured, decide the water level. In fuzzy testing process, water circulation flashing
lights display, digital pipe display "--".
Power failure memory function
If t
he power supply becomes off suddenly during operation, the machine remembers the
current operation state.When power is on,the machine returns to former operation state
automatically.
One Touch System
After power on,push
start/pause"button directly to One-key Washing.The function will be canceled if
"
other buttons,such as water level,program,temperature and function are pressed before.It will also
be invalid if there is water left in the inner tube,and the program will be directly set into Normal with
default water level 6.
WM will perform fuzzy detection immediately by pushing
level and program will be selected according to amount of clothing.During the selecting,water level
lamp is flashing continuously,as digital display shows
effective.After detecting is completed,program is chosen to
level 1/2/3,and
Normal"with water level 4/5/6,also, "Super clean" with water level 7/8. Program will
"
run automatically when checked out and finished program and water level setting.
In addition, the fuzzy measure before, if
start/pause" after power on and water
"
at the same time,only power button is
"--",
Rapid"with automatically setting water
"
14
Hide quick links:
Advertisement
