Preparation Before Washing - Midea MFW-1250MV2 Owner's Manual

Preparation before washing

Adjust the adjustable foot to make
1
the washer be placed stable.
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground. Then tighten the
adjustable foot knob and lock it. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer barrel
will incline and knock the cabinet)
Put down the drain
Connect with to
3 5
hose.
power source.
Gravity drain
Upper drain
Turn on the
4
water supply.
Note:
The water
will overflow
when the
height of
the drain
hose under
860mm.
Before washing, please do take out coins,
NOTICE
keys and other hard goods, and zip up clothes
！
tightly to prevent them and barrel from damage.
Install the water
2
inlet hose.
For one inlet hose
For two inlet hoses
Put in
6
clothes
and
suitable
amount of
washing
powder.
7
Parts identification of the washer
Control panel
Accessories
Fixing ring (1) is used
for the fixing in time of
Universal connector
the installation of the
lower drain hose.
Water inlet hose assembly
Only for model with single
Only for lower drain hose
screw thread water inlet pipe
Please refer to the real material as the attachment
Upper drain hose
(For upper drain only)
Top lid
frame
Cabinet
Drain hose
(For lower drain only)
Adjustable leg
Adjustable foot knob
Self-tapping screw
Base cover
Water inlet hose assembly
Only for model with double
Only for models including base cover
screw thread water inlet pipe
8