Connecting Audio Amplifiers - Loewe Spheros R 32 HD+ Operating Instructions Manual

Operating additional equipment

Connecting audio amplifiers

The sound components wizard permits configuration of different audio
amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with
different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM).
See the operating manual of the audio amplifier for more information.
Call TV menu.
34 S elect Connections,
6 go to the menu line below.
3 4 S elect Sound components.
OK calls the sound components wizard
6 M ark the HiFi/AV amplifier.
Sound components
Sound playback via ...
TV speakers
Speakers system
HiFi/AV amplifier
HiFi/AV amplifier or TV speakers (switchable)
Proceed
OK
OK to continue.
34 S elect Digital audio transmission.
Continue, depending on the amplifier, see right column.
Explanations of the setting possibilities:
HiFi/AV Select the setting when an amplifier is connected and the
amplifier TV speakers are not used.
HiFi/AV Select the setting when an amplifier is connected and the
amplifier or TV
TV speakers are used. In the sound mode selection the
speakers audio reproduction can then be switched between the
(switchable) amplifier and the TV speakers.
Sound formats Specify sound formats which can be decoded with the
digital amplifier (see operating manual of the used ampli-
fier).
Type of Select either stereo or surround amplifier.
amplifier
TV loudsp. as For every connected surround amplifier, select whether
centre speaker the TV loudspeakers are to be used as centre speaker.
If so, establish a connection between the centre output
of the amplifier and the centre input of the TV set AUDIO
IN1 C with a cinch cable.
Attention: Do not use the centre speaker connection of
the amplifier, use the centre pre-amp output instead!
- 44
Connecting digital audio amplifiers
END

OK
Connecting analogue audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select yes.
Connect the digital audio output of the TV set AUDIO
DIGITAL OUT with the digital audio input of the amplifier
via a cinch cable:
AUDIO DIGITAL OUT
PREOUT
AUX1 IN AUX OUT AUX 2
FL C FR
L L
DIGITAL
IN
DIGITAL
OUT
SL SUB SR
R R
Sound formats, amplifier type and other settings, see
explanations of the setting possibilities.
Continuation of the left column above ...
For digital audio transmission: Select no.
Connect the analogue audio output of the TV device
AUDIO OUT L/R via a stereo cinch cable to the analogue
audio input of the amplifier:
AUDIO OUT L/R
PREOUT
AUX1 IN AUX OUT AUX 2
FL C FR L L
DIGITAL
IN
DIGITAL
OUT
SL SUB SR
R R
For selecting the amplifier type and making other settings,
see explanations of the setting possibilities.
TV set
Digital amplifier
TV set
Analog amplifier