Replacing The Battery - Unitron Conversa.NT Digital ITE User Manual

Replacing the Battery

1. Gently swing out the battery door with your
fingernail.
2. Grasp the battery with your thumb and index finger
and remove.
3. Insert the new battery into the battery door with the
plus (+) sign on the battery facing the same way as
the plus (+) sign on the edge of the battery door. This
will ensure that the battery door closes properly.
Note: If the battery is inserted incorrectly, the door will
not close.
4. Close the battery door.
Plus (+)
Signs
Low Battery Warning
When you hear one long beep, your digital hearing aids
are warning you that their batteries are low. You will hear
the warning approximately every 30 minutes until you
change the batteries or the batteries die. After the first
warning, you may experience some reduction in sound
quality. This is normal and can be remedied by inserting
12
Plus (+)
Signs