Unitron Conversa.NT Digital ITE User Manual page 12

Using Conversa.NT
Conversa.NT can also come equipped with an optional
Easy t-coil (automatic telephone coil) that can help you
listen on the telephone. The Easy t-coil automatically
switches your hearing instrument into a telephone
listening mode with hearing aid compatible phones.
If your phone is hearing aid compatible, it will have a
magnetic coil and the Easy t-coil will activate
automatically when the telephone is held to the ear. Once
the telephone is removed from the ear, the hearing
instrument will switch back to the normal listening mode.
Since the location and strength of the magnetic coil
varies among phone manufacturers, it may be necessary
to move the telephone receiver slightly to find the best
reception. If the hearing instrument does not switch to
telecoil automatically when the telephone receiver is
placed in proximity, the magnet for Easy t-coil hearing
instruments should be attached to the telephone
receiver. The magnet is designed to strengthen the
magnetic coil in hearing aid compatible telephones.
To affix the Easy t-coil magnet:
1. Clean the telephone receiver.
2. Hold the magnet near the "listening end" of your
telephone receiver and release it (figure 1). The
magnet will flip to the appropriate side and seek the
optimal position on the telephone receiver.
10
™
with Easy t-coil for the Telephone