X10 UR24E User Manual page 7

[3] LEARN: Lets you learn IR commands from an existing remote, that might not be in the 8
in 1 library
[4] SETUP: This allows you to program your remote before the first use.
[5] TV, VCR, SAT, DVD, CBL and CD : These keys allow you to select the appliance you
wish to control.
[6] PC: In combination with the optional USB-RF receiver, this key will allow you to control
MP3, DVD and CD function on your PC. Ask your dealer for more information.
[7] X10 mode: To control the lights/appliances connected to an X10 module
[8] SHIFT: Lets you have access to secundary function like: menu, exit, ok, left, right, up,
down,etc.In the Shift mode, the LED is ON continuously. To end the SHIFT mode press the
SHIFT key once more.
[9] Showview:
In VCR mode: Programming of a ShowView or VIDEOPLUS+ recording (see equipment
manuals).
In TV, CAB, SAT and CD mode: allows to sequentially scan up available program channels
[10] Numeric keys 0 - 9 : To enter device code
For A/V applications: Work the same way as your original remote
In Home Automation Mode: to select one X10 module, to change the X10 House code
[11] ENT: If you are in programming mode - automatic code search - you can confirm the
code of the device you want to control. In connection with the numeric keys (11) this button
allows you, with some equipment, to select directly channels higher than 9.
[12] A.B: Selection of the SCART plug to view DVD, SAT, VCR, ... on your TV screen.
[13] INFO : Displays information of the selected appliance, work the same way as your
original remote
[14] Channel + / - :
For A/V applications : Selects the next or the previous channel of the last selected mode,
in Shift mode: lets you navigate up and down in the menu of the selected equipment.
In Home Automation Mode : allows you to turn ON / OFF any light / appliance connected
to an X10 module.
[15] Mute / OK / ALL OFF:
For A/V applications : Allows you to turn ON/OFF the sound of the last selected appliance,
in Shift mode: confirm the menu selection of the selected equipment.
In Home Automation Mode : allows you to switch OFF all the lights and appliances
connected to an X10 module.
[16] Volume + / -:
For A/V applications : Controls the volume in VCR, TV , DVD, SAT, CD mode, in Shift
mode:lets you navigate Left and Right in the menu of the selected appliance.
In Home Automation Mode : allows you to DIM / BRIGHT a light connected to an X10
module.
[17] M1 M2: Macro key. Lets you execute pre-programmed sequence of IR commands.
7