X10 UR24E User Manual page 6

Contents
1) Introduction
2) Put in the batteries
3) General point
4) Functions of the key
5) Programming for the TV, VCR, Satellite, CD, DVD and CBL
6) Manual code search " AUTOSEARCH "
7) Automatic code search
8) Identifying codes found
9) Learning commands
10) Clearing learned commands
11) Macro function
12) Controlling your house with X10 home automation modules
13) Changing the X10 House Code
14) Troubleshooting
1) Introduction
The 8 in 1 remote control is designed to control up to 8 devices (TV, VCR, DVD, Satellite, CD,
CBL and PC, plus X10 modules). The remote control contains a library of codes which are
pre-programmed into the remote control. This library covers nearly all the audio video products
on the market today.
To make it easy for you to find the right code for your audio video equipment, we advise to use
the AUTOSEARCH feature.
2) Put in the batteries (always use NEW alkaline batteries LR03)
1.Open the cover on the back of the remote.
2.Insert 4 AAA batteries - LR03 alkaline, verify that they are placed correctly with the + on the
battery in the same position as marked inside the battery compartment.
3) General Point
The RF transmission: It is simultaneous to the IR signal. It allows you to control your TV,
VCR ... through walls and floors, thanks to the Power Mid (optional).
The double function : it allows you to control the volume and the " mute " button of your TV
even when you are in VCR, DVD, SAT or CD or SAT mode.
4) Functions of the keys
[1] LED indicator : The indicator light flashes when the remote is operating or lights
continuously while you are programming the remote.
[2] POWER / ALL LIGHTS ON:
For A/V applications : Allows you to switch off the last selected appliance.
In Home Automation Mode : allows you to switch ON all the lights connected to an X10
module.
Universal Remote 8 in 1 - UR24
6