Ila Series Installation Line Array - QSC TouchMix Series Pocket Reference Manual

38 Loudspeakers
ILA Series v2 Installation Line Array
Installed Sound
WL2082-i with WL118-sw
using EB2082-i extension
bar and FB2082-i fly-bar.
Designed for installation applications while retaining the
performance of high-end touring line array systems, the ILA
System v2 takes this concept and builds on it by offering a
complete and accessible solution consisting of processing,
amplification, line array, subwoofer and suspension
accessories. Built around the WL2082-i line array element,
the system offers both flying (WL118-sw) or ground-stacked
(GP118-sw) subwoofer options.
WL2082-i
• Dual 8" diameter low-frequency drivers.
• Dual 44 mm (1.75 in) voice coil diameter, neodymium compression drivers
with titanium domes.
• Patented* multiple aperture diffraction waveguide that provides extremely
wide coverage (140º).
• Available in black or white and constructed from high impact polystyrene.
• May be used in outdoor applications where the system is not directly
exposed to the elements.
*Patent No. 7,177,437
WL2082-i
Frequency Range (-10 dB) 68 Hz – 22 kHz
Nominal Coverage 140° H
Peak Output 132 dB
2
Power Handling
1
HF 100 W
LF / MF / Bi-amp 400 W
Tri-amp 200 W + 200 W
Driver Information
2 x 8" transducers; 2" voice coil; neodymium magnet
LF
HF
2 x 1.75" titanium diaphragm, neodymium magnet
Input Connectors 2 x NL8 in parallel
Enclosure HiPS
Net Weight (each) 37 lb / 16.8 kg
1 Continuous IEC specified test signal, 2 hours.
2 Calculated at 1 m using power capacity and system sensitivity.
6 dB peak-to-average signal ratio assumed.
As part of QSC's ongoing commitment to product development, specifications are subject to change without notice.
Loudspeakers 39