Listening To Fm Stations - Teac CR-H260iDAB Owner's Manual

3
1
Press the SOURCE button repeatedly to
select "TUNER FM".
When using the remote control, press its TUNER but-
ton once or twice to select FM.
2
Press the TUNING MODE button to select the
tuning mode.
Each time you press the TUNING MODE button, the
tuning mode changes as follows:
Manual tune
Preset tune
3
Turn the MULTI JOG knob to tune the station
you want.
44

Listening to FM stations

1 2
Auto tune
Manual tune
Turn the MULTI JOG knob until you find the station you
want. On the remote control unit, press the Scroll buttons
(k/j).
The frequency changes by steps of 0.05 MHz.
Automatic tune
Turn the MULTI JOG knob to start automatic tuning.
When a station is found, the unit tunes in to the station
automatically.
Press and hold one of the scroll (k/j) buttons for at least
a second to start automatic station tuning. When a station
is received, automatic tuning will stop.
Repeat this step until the station you want to listen to is
found.
p If you want to stop the tuning process, press the Stop
button (8).
Preset tune
Turn the MULTI JOG knob to tune in to a selected preset
station.
You can also use the remote control's Skip buttons
(.//) to tune in to a selected preset station.
p For detailed information about presetting a station, see
pages 45 and 46.
If the reception is poor
Rotate or relocate the antenna to find the best position for
reception.