Listening To The Fm Radio - Teac DR-H300DAB Owner's Manual

1
Select FM using the FUNCTION button (or the
DAB/FM button of the remote control unit).
2 Select the station you want to listen to (auto
selection).
Hold down the TUNING button (+ or –) for more
than a second.
'Searching...' appears on the display, and the unit
starts searching for a station.
When a station is tuned in, the tuning process will
stop automatically.
Repeat this step until the station you want to listen
to is found.
< If you want to stop the tuning process, press the
TUNING button.
Selecting stations which cannot be tuned
automatically (manual selection)
When the TUNING button is pressed momentarily,
the frequency changes by a fixed step.
Press the TUNING button repeatedly until the
station you want to listen to is found.
46

Listening to the FM Radio

FM mode
Auto:
Mono:
Pressing the SELECT button in FM mode alternates
between Auto (Stereo) mode and Mono mode.
FM stereo broadcasts are received in stereo.
To compensate for weak FM stereo reception,
select this mode. Reception will now be forced
monaural, reducing unwanted noise.