Speaker Connections - Teac CR-H260iDAB Owner's Manual

Speaker connections

Speaker Speaker
(right) (left)
Connect speakers to this unit using commercially available
speaker cables.
p The black speaker terminals are _ (negative). Generally,
the + wire of the speaker cable is marked to make it
distinguishable from the _ wire of the cable. Connect
the marked wires to the red + terminal and the
unmarked wires to the black _ terminal.
p Check the impedance of your speakers. Connect speak-
ers with an impedance of 6 ohms or more.
p If the exposed end of a core wire in a speaker cable con-
tacts another cable or terminal, a short could occur. Do
not allow this to happen.
p To avoid noise, do not bundle the speaker cables with
the power cord or other cables.
Connecting speaker cables
1
Turn the terminal cap counterclockwise to
loosen it.
2
Insert the wire into the terminal and turn the
terminal cap clockwise to securely connect it.
3
Make sure it is fastened firmly by pulling
the cable lightly.
NOTE
In accordance with European safety regulations, it is not
possible to connect banana plugs to the speaker terminals
on European models. The holes into which banana plugs
are inserted have been covered with black caps. Connect
the speakers using bare wires. If the black caps become
separated from the terminals, return them to their original
position.
17