Samsung SND-L6013 User Manual page 33

installation
1. Attach the installation template to the
selected area and punch 3 holes as shown in
the figure.
2. Use the 2 supplied screws to fix the camera
to the 2 punched holes.
Set the <FRONT> mark imprinted on the camera to
`
face the direction of camera monitoring.
3. Connect the camera internal terminal with the
corresponding cable.
4. Adjust the lens in a desired direction by
referring to the "adjusting the monitoring
direction for the camera" section. (page 44)
We recommend you not to touch the lens as the camera lens has been properly focused in the
`
J
final process of manufacturing. If so, the lens may be out of focus or stained by alien substances.
5. Please connect the inner cover to the main body.
6. While grabbing the bottom side of the camera with
your hand, please grab and push its cover with the
other hand to align the two arrow signs, as shown in
the figure.
Pay attention to the direction for assembly.
`
J
Please don't rotate the dome cover, but push to assemble it.
`
If it is assembled by rotating it, there may be a diffused
reflection.
FRONT
NETWORK
ACT LINK
English _33