Table of Contents
Advertisement
LAN, it means the client can't send or receive any data via this device. Choose
"allow" or "deny" to allow or deny the clients, whose MAC addresses are not in the
"Control table", to associate to the wireless LAN.
Control table
"Control table" is the table at the bottom of the "MAC Address Control" page. Each row of this table
indicates the MAC address and the expected IP address mapping of a client. There are four columns in this
table:
MAC Address
MAC address indicates a specific client.
IP Address
Expected IP address of the corresponding client. Keep it empty if you don't care its IP
address.
C
When "Connection control" is checked, check "C" will allow the corresponding client
to connect to this device.
A
When "Association control" is checked, check "A" will allow the corresponding client
to associate to the wireless LAN.
In this page, we provide the following Combobox and button to help you to input the MAC address.
You can select a specific client in the "DHCP clients" Combobox, and then click on the "Copy to" button to
copy the MAC address of the client you select to the ID selected in the "ID" Combobox.
Previous page and Next Page
To make this setup page simple and clear, we have divided the "Control table" into several pages. You can
use these buttons to navigate to different pages.
47
Advertisement
Table of Contents
