Window Requirements - GE AW18 Use And Care & Installation Manual

Table of Contents

Advertisement

BEFORE YOU BEG/fl
Read these instructions completely and
carefully.
IMPORTANT–Observe all governing codes
and ordinances.
instructions with the consumer.
CONSUMER–Keep these instructions for
future reference.
ELECTRICAL REQUIREMENTS
FOR PERSONAL SAFETY:
THIS APPLIANCE MUST BE PROPERLY
GROUNDED. See grounding instructions.
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD GROUNDING
PRONG FROM THE POWER CORD.
WE RECOMMEND THAT YOU DO NOT USE
AN EXTENSION CORD OR AN ADAPTER
PLUG WITH THIS APPLIANCE.
DO NOT CHANGE THE PLUG ON THE
POWER CORD OF THIS APPLIANCE.
FOLLOW NATIONAL ELECTRICAL CODES
OR LOCAL CODES AND ORDINANCES.
115V
230V/208V
20 AMP circunt
15 AMP circujt
"perpendicular" type
"parallel" type
If the electrical supply provided does not meet
the above specifications, call a licensed electrician.
Aluminum house wiring may pose special
problems—consult a qualified electrician.
this appliance.
8
230V/208V
230V/208V
15 AMP circuit
30 AMP circuit
"tandem" type
"tandem" type

WINDOW REQUIREMENTS

Standard double-hung window with actual
opening width of 29" to 46".
Clear vertical opening of 18" minimum from
bottom of sash to stool.
Install the air conditioner in a window where
there will be enough clearance around the cabinet
to allow ample circulation of air through the unit.
t
.
min.
1
Note:
supporting parts should be secured to
All
firm wood, masonry or metal.
I
46"

Advertisement

Table of Contents
loading

Table of Contents