GE AW18 Use And Care & Installation Manual page 10

WINDOW INSTALLATION (cont,""e~,
See Front Grille section.
PREPARE CHASSIS.
1. Remove chassis locking bracket and chassis
locking screw with a Phillips head screwdriver.
(Save for reuse.)
Chassis locking screw
2.
Remove ground screw and ground wire. (Save
for reuse.)
3.
Remove chassis from cabinet using the base pan
as a handle.
10
Chassis locking bracket
wire
PREPARE CABINET
Room side +
Type D screw
1. Install top mounting rail onto top of cabinet with
3 Type D screws.
Type B screw
2. Install bottom sill channel onto cabinet by
inserting notches on channel into slots located on
bottom of cabinet and securing with 3 Type B
screws.
Type B o
screw