GE AW18 Use And Care & Installation Manual page 12

WINDOW INSTALLATION (Continued)
lNSMLL SASH GASKEZ
Cut foam sash gasket to window width and stuff
between top of lower sash and glass panes of
upper sash. Make sure foam gasket is flush with
top of lower sash.
Install sash locking bracket using Type A screws.
12
1. Slide chassis into cabinet. (Make sure tubing on
unit is not touching wall case. )
2. Lock chassis into cabinet by reinstalling chassis
locking bracket and chassis locking screw removed
in Step 2.
3. Reconnect ground wire removed in Step 2 to
chassis.
4. Remove enough line cord to reach the wall
receptacle.
Type A
screw
Seal small openings around cabinet with gum-type
sealer, provided.
See Front Grille section.
Chassis locking bracket
I
I