Aaeon SBC-780 User Manual page 45

F u l l - S i z e C P U C a r d
l
IDE Primary/Secondary Master/Slave
²
²
²
²
Chapter3 Award BIOS Setup
IDE HDD Auto-Detection
This section does not show information about
devices, such as a CD-ROM drive, or other hard drive types,
such as SCSI drives.
NOTE: It is recommended to select "AUTO" for all drives.
The BIOS can automatically detect the specifications and
optimal operating mode of almost all IDE hard drives. When
you select AUTO for a hard drive, the BIOS will detect its
specifications
IDE Primary/Secondary Master/Slave
If you do not want to select "AUTO", other methods of
selecting the drive type are available:
1.NONE: No drive type to be selected.
2.Manual: This will allow you to manually set the drive type you
are using in your system. (See as below)
Drive A
Drive B
Select the correct specifications for the diskette drive(s) installed
in the computer.
n
None
n
360K, 5.25 in
kilobyte capacity
n
1.2M, 5.25 in
1.2 megabyte capacity
n
720K, 3.5 in
kilobyte capacity
n
1.44M, 3.5 in
mega byte capacity
n
2.88M, 3.5 in
S B C - 7 8 0
No diskette drive installed
5-1/4 inch PC-type standard drive; 360
5-1/4 inch AT-type high -density drive;
3-1/2 inch doubl e-sided drive;
3-1/2 inch double-sided drive;
3-1/2 inch double-sided drive;
other IDE
720
1.44
2.88
3 - 7