Service Jigs And Tools - Sony DCR-HC39E Service Manual

DV MECHANICAL ADJUSTMENT MANUAL VII

2-4. Service Jigs and Tools

Ref. No.
J-1 Cleaning fluid
J-2 Wiping cloth
Super-fine applicator
J-3
(made by Nippon Applicator (P752D))
J-4 Mirror (small oval type)
J-5 Tracking tape (XH2-1) (NTSC, PAL)
J-6 Mini DV torque cassette
J-7 FWD/BACK T adjustment screwdriver
J-8 Torque screwdriver
J-9 Tape path screwdriver
Adjustment remote commander
J-10
(RM-95 upgraded)
J-11 Mode Selector II
J-12 Mode Selector II conversion board (Z)
Mode Selector II ROM (supporting Z mechanism)
J-13
* Note 1
Other required equipment: Oscilloscope
Note 1: This is the ROM used for upgrading the version of Mode Selector
II to enable it to be used for the Z mechanism.
Name Part code Jig inscription
Y-2031-001-0
7-741-900-53
—
J-6080-840-A GD-2038
8-967-997-01
J-6082-360-A
J-6082-187-A
J-9049-330-A
J-6082-026-A
J-6082-053-B
J-6082-282-B
J-6082-493-A
J-6082-314-G
— 6 —
Used for
Tape path
Tape path
For TG2 FWD position adjustment
For tape path adjustment
General adjustment (ROM version 1.8)
ROM for Mode Selector II