Only For Training And Service Purposes - LG KU380 Service Manual

4.6.2 Checking UMTS PAM Control Block
• PAM control signal
1. PWR_DET : UMTS Tx Power Detected value (Check R120)
2. TX_AGC_ADJ : UMTS RTR6275 Tx Amp Gain Control
3. VREG_TCXO_2.85V : UMTS PAM enable (C170) (about 2.85V)
4. +VPWR : UMTS PAM Main Voltage ( 3V < +VPWR < 4.2V)
5. PA_ON : Turns the PA on and off
6. PA_R0 : Control signals that step the active PA mode and bias
Copyright © 2007 LG Electronics. Inc. All right reserved.

Only for training and service purposes

+VPWR
- 83 -
4. TROUBLE SHOOTING
PWR_DET
PA_R 0
PA_ON
VREG_TCXO_2.85
LGE Internal Use Only