Battery Installation - VTech DS6151 User Manual

Getting started

Battery installation

Install the battery as shown below.
1. If the battery compartment cover is on the handset, press on the
indentation and slide the cover to remove.
2. Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label.
Place the battery with the label THIS SIDE UP facing up and the wires
3.
inside the battery compartment.
4. Align the cover flat against the battery compartment, then slide it towards
the center of the handset until it clicks into place.
Charge the handset by placing it in the telephone base. The CHARGE
5.
light is on when the handset charges.
1
4
• If the handset will not be used for a long time, disconnect and remove the
battery to prevent any possible leakage.
• To purchase a replacement battery, visit our website at www.vtechphones.com
or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or
call 1 (800) 267-7377.
2
5
CHARGE
light
2
3