Download Print this page

Conair GMT900 Instruction Booklet page 2

Advertisement

Stubble trIm top tIpS
cleanIng & maIntenance
• Regular cleaning will maintain the high
• Use on clean, dry hair.
performance of your stubble trim.
• If possible, when using for the first time, try
• Switch off and remove the power cord if
and grow your facial hair for a few days
connected.
before cutting so you can trim down to a level
that is best for you.
• Detach the comb guide by gently lifting the
front of the comb guide from both sides and
• Set the cutting length as required.
flipping it over to the back of the unit and
• It is always best to start cutting with a
locking it into position by clicking it securely
longer length first, then trim again if the
onto the fastener on the back of the handle.
length is longer than desired.
• Use the cleaning brush supplied to brush
• Hold the stubble trim against the hair, the
away any hair and debris. Do not use a sharp
teeth of the comb guide should be pointing
object to clean the trimmer blade.
upwards and should be flat against the face.
• The blades can be removed to aid cleaning.
• Move the trimmer upwards through the hair,
• To remove the blades hold the handle of the
a little at a time, against the direction of hair
stubble trim with one hand, place your thumb
growth. The floating and contouring head will
underneath the blades and push the blades
follow the curves of your face to ensure both
away from the handle.
accuracy and comfort.
• Gently blow away any hair trapped beneath
• The stubble trim will work most effectively
the blades.
when cutting through the hair at its own
speed – never force through the hair. You may
• The blades can be rinsed under the tap.
experience a little resistance when trimming
After rinsing the blades they may need to be
the neck area, where hair is thicker and
oiled. See oiling instructions below.
grows in many different directions. This is
• Ensure the blades are dry before reattach-
completely normal.
ing to the trimmer body.
• Just like shaving, extra time should be
• Ensure you clean the blades after each use
given when trimming under the neck area, as
and before storing away.
again this is where hairs grow in many
• It is highly recommended to oil the blades
different directions.
from time to time with the oil provided. This
• Never switch the trimmer off while in the hair.
ensures optimum cutting performance. For
the first use you will need to use the oil
supplied with the product, unscrew the cap
and cut off the very end of the plastic tube
with a pair of scissors to release the oil.
To oil the blades ensure the unit is switched
10pg117928_gmt900 IB-10/512.indd 2
battery removal InStructIonS
on. Gently squeeze the oil tube and apply 2
drops of oil onto the blades. Leave the unit on
for a further few seconds to allow the oil to
thoroughly spread the length of the blades.
Switch off the unit and remove any excess oil
by gently dabbing with a cloth.
battery dISpoSal
This appliance contains Nickel Metal Hydride
batteries. To protect the environment this
appliance and its batteries must be disposed of
safely. At the end of its life, please take this
appliance to a recycling center, where the
internal rechargeable battery should be
removed by a professional and recycled
separately. For more information about the
recycling of electrical and battery operated
appliances please contact your local council
office or your household waste disposal service.
For specific enquiries regarding the replace-
ment of batteries in this product please contact
our Conair Customer Care Line.
CONTAINS NICKEL METAL
HYDRIDE BATTERIES. MUST BE
COLLECTED, RECYCLED OR
DISPOSED OF PROPERLY. DO
NOT DISPOSE OF IN
THE MUNICIPAL WASTE.
lImIted two year warranty
Conair will repair or replace (at our option) your
unit free of charge for 24 months from the date of
purchase if the appliance is defective in workman-
ship or materials.
To obtain service under this warranty, return the
defective product to the service center listed below,
together with your purchase receipt and $5.00 for
postage and handling. California residents need only
provide proof of purchase and should call 1-800-
366-0937 for shipping instructions. In the absence
of a purchase receipt, the warranty period shall be
24 months from the date of manufacture.
any ImplIed warrantIeS, oblIgatIonS, or
lIabIlItIeS, IncludIng but not lImIted to
tHe ImplIed warranty of mercHantabIlIty
and fItneSS for a partIcular purpoSe,
SHall be lImIted In duratIon to tHe 24
montH duratIon of tHIS wrItten, lImIted
warranty. Some states do not allow limitations
on how long an implied warranty lasts, so the above
limitations may not apply to you.
In no event SHall conaIr be lIable for
any SpecIal, IncIdental, or conSeQuentIal
damageS for breacH of tHIS or any otHer
warranty, eXpreSS or ImplIed, wHatSoever.
please register this product at:
Some states do not allow the exclusion or limitation
www.conair.com/registration
of special, incidental, or consequential damages, so
©2011 Conair Corporation
the above limitation may not apply to you.
Service center
This warranty gives you specific legal rights, and you
Conair Corporation
may also have other rights, which vary from state
Service Department
to state.
7475 North Glen Harbor Blvd.
Glendale, AZ 85307
10PG117928
STUBBLE TRIM
the ultimate in stubble control
Instruction Booklet
For your safety and continued enjoyment
of this product, always read the instruction
booklet carefully before using.
®
IB-10/512
Model GMT900
12/22/10 12:28:38 PM

Advertisement

loading