Pairing With Bluetooth Devices Using Nfc; Connecting To Paired Devices - MEE MATRIX2 AF62 User Manual

PAIRING WITH BLUETOOTH DEVICES USING NFC

Note: When the volume reaches the minimum or maximum level there will
be two short tones.
a) Put the Matrix2 in pairing mode
b) Place the NFC-compatible device against the left ear cup of the Matrix2
until pairing is complete.
c) A dialog box should automatically appear; if the dialog box does not
appear, re-position the device until it does
d) Follow the instructions on the screen to pair the device with the Matrix2

CONNECTING TO PAIRED DEVICES

*** The Matrix2 must have been previously paired
with your device before you can connect ***
When the Matrix2 is turned on and not in pairing mode, it should connect
to the last connected device automatically. If the last connected device
discoverable, the Matrix2 will connect to other paired devices in the order of
last connection.
If the Matrix2 does not connect and remains in standby mode, a short press
of the Play/Pause button will connect to the last connected device with
Bluetooth on and within range.
Note: On some PC and Mac computers you will need to manually enable
Bluetooth audio every time you connect
.