USER MANUAL English BLUETOOTH WIRELESS SPORTS ® IN-EAR HEADPHONES USER MANUAL model: X7 Please read this manual in its entirety to ensure best fit and sound.
PRODUCT OVERVIEW Stereo Bluetooth Wireless Sports In-Ear Headphones Remote Micro-USB charging port Volume up/skip track button Status indicator light Microphone Multifunction button Volume down/previous track button...
Page 4
*** Connect the Micro-USB charging cable to any powered USB port and to the charging port of the X7, which is located underneath a cover on the remote. Charge time is approximately 2 hours. The status indicator light on the right earpiece will stay red while the headset is charging and turn blue once it is charged and ready for use.
Page 5
FIRST USE: SELECTING EARTIPS The X7 is an in-ear earphone and relies on a tight seal between the eartips and your ear canals to deliver good bass response and overall sound quality. Three sizes of ear tips are included to help you achieve the best fit. We recommend trying all three sizes and selecting the ones with the best sound and comfort for your ears.
Page 6
WEARING THE X7 The X7 features an over-the-ear fit with a flexible “memory wire” section located near the earpieces. Wearing the earphones correctly will ensure the most comfortable and secure fit: 1. Identify the right and left earpieces. RIGHT EARPIECE LEFT EARPIECE 2.
Page 7
WEARING THE X7 (Continued) 3. Adjust each earpiece until it fits flush in your ear and the eartip seals in the ear canal. 4. Tighten the sliding cable cinch for the most secure fit.
USE WHILE EXERCISING The X7 is ideal for exercise as the over-the-ear fit will keep it in place during just about any activity. Tighten the cable cinch behind your neck to make the fit even more secure. If you must remove and reinsert the ear pieces during a workout, avoid getting sweat in the nozzle as this will cause a temporary reduction/loss of sound.
Page 9
CONTROLS The X7 can control media and phone calls from a smartphone or tablet. VOLUME UP / SKIP TRACK BUTTON [TAP] - Increase volume [HOLD 1 sec] - Next track MULTIFUNCTION BUTTON [HOLD 3 sec] - Power on [TAP] - Play / Pause...
Page 10
“MEE audio X7” from the Bluetooth menu of the device. If you no longer wish to connect to multiple devices, disable Bluetooth on the device you do not want connected to the X7 or remove the “MEE audio X7” pairing from the Bluetooth menu of the device.
TROUBLESHOOTING Factory Reset (clear paired devices) A factory reset will clear all paired devices from the memory of the X7. To perform a factory reset, first put the headset in pairing mode as described in the Pairing with Bluetooth devices section. Once in pairing mode, press and hold all three remote buttons simultaneously for approximately 5 seconds.
SAFETY AND CARE • When not in use, power the headset off and store in the included protective carrying pouch. • Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight. •...
Phone is a registered trademark of Microsoft Corporation in the United States and other countries. ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such ® marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners.
Need help?
Do you have a question about the X7 and is the answer not in the manual?
Questions and answers