Related Manuals for MEE AF18
Summary of Contents for MEE AF18
- Page 1 USER MANUAL AF18 Stereo Wireless Sports Earphones Please read this manual in its entirety to ensure best fit and sound.
-
Page 2: Package Contents
PACKAGE CONTENTS AF18 Stereo Wireless Sports Earphones Micro-USB 3 pairs of charging eartips cable Cable cinch 1 pair of User Earfins manual... -
Page 3: Product Overview
PRODUCT OVERVIEW AF18 Stereo Wireless Sports Earphones Right Earpiece Left Earpiece Multifunction button Earfin Volume up / Micro-USB skip track button charging port LED status indicator light Volume down / previous track button Built-in microphone... - Page 4 Apple devices such as the iPhone®, iPad®, and iPod touch® will also display an on-screen headset battery indicator when the AF18 is connected. Note: the lifetime of the battery will be significantly reduced if your headset is not charged for a long period of time.
-
Page 5: Wearing The Earphones
Wearing the earphones correctly will ensure the most comfortable and secure fit Step 1: Select and install the correct eartips. The AF18 is an in-ear headphone and relies on a tight seal between eartip and ear canal to deliver great sound and bass. -
Page 6: Bluetooth Pairing
It is only necessary to pair your headset once with each device. Make sure the AF18 is turned off and within 3 feet (1 meter) of your device. Put the headset in pairing mode by pressing and holding the Multifunction button for about 5 seconds until the status indicator begins to flash red and blue in an alternating pattern. -
Page 7: Connecting To Paired Devices
AF18 simultaneously. Both devices will need to be paired before Multipoint can be used. To use two Bluetooth devices with the AF18, first pair them by following the procedure described in the Bluetooth pairing section for each device and then turn off the headset. - Page 8 FUNCTIONALITY & CONTROLS Headset Function Operation Status Press and hold the Multifunction button Powered off Power on for 1 second Press and hold the Multifunction button Power off for 3 seconds Powered on Press the Volume up or Raise or lower Volume down button volume Incoming...
-
Page 9: Factory Reset
FACTORY RESET A factory reset will clear all paired devices and restore all settings to factory default. To perform a factory reset, insert charging cable, then press and hold the Multifunction button for 3-5 seconds. The status indicator light will flash purple three times to confirm that the system was successfully reset. -
Page 10: Troubleshooting
WARRANTY: The AF18 is covered by a 1-year manufacturer warranty. For more information, visit www.MEEaudio.com Have a question? Email support@meelec.com MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved. iPhone , iPad , iPod , iPod touch , and Siri are registered trademarks of Apple Inc. - Page 11 www.MEEaudio.com support@meelec.com...
Need help?
Do you have a question about the AF18 and is the answer not in the manual?
Questions and answers