Related Manuals for MEE Wave AF36
Summary of Contents for MEE Wave AF36
- Page 1 USER MANUAL ® Bluetooth Wireless Stereo Headphones with Headset Functionality Model: AF36...
-
Page 2: Package Contents
PACKAGE CONTENTS Bluetooth Wireless Stereo Headphones ® with Headset Functionality Wave Stereo Micro-USB Bluetooth charging Wireless cable Headphones Carrying Stereo audio pouch cable for wired use User manual... -
Page 3: Product Overview
PRODUCT OVERVIEW Bluetooth Wireless Stereo Headphones ® with Headset Functionality Left Earcup Right Earcup Status indicator light Audio jack for wired use Play/pause/multifunction button Charging connector Volume up button ( ) Next track button ( ) Previous track button ( ) Built-in microphone Volume down button ( ) -
Page 4: Turning On And Off
CHARGING *** You must completely charge the headset before the first use *** Connect the Micro-USB charging cable to any powered USB port and to the charging jack of the Wave, which is located underneath a cover on the left earcup. -
Page 5: Pairing With Bluetooth Devices
PAIRING WITH BLUETOOTH DEVICES *** Your headset must be paired to a Bluetooth device before it can be used. It is only necessary to pair your headset once with each device *** Make sure the Wave is turned off and within 3 feet (1 meter) of your device. Press and hold the Multifunction button for about 5 seconds until you hear the headphone say “Pairing”. -
Page 6: Connecting To Paired Devices
CONNECTING TO PAIRED DEVICES Once the Wave is turned on, it will automatically connect with the last paired Bluetooth device that is on and within range. If the Wave is not connected automatically, tap the Multifunction button once to initiate connection with last paired device. -
Page 7: Controlling Media Playback
CONTROLS (Continued) Controlling Phone Calls (Continued) Status Function Operation Multifunction Press and hold the Transfer call to headset Call in progress, button for 2 seconds phone handset active* Multifunction End call Press the button Call in progress, Hang up current call Multifunction Press the button... - Page 8 MULTIPOINT Multipoint allows two Bluetooth devices to be connected to the Wave simultaneously. Both devices will need to be paired before multipoint can be used. Multipoint Pairing To use two Bluetooth devices with the Wave, first pair them by following the pairing procedure described in the Pairing with Bluetooth devices section for each device and then turn off the headset.
-
Page 9: Using As A Wired Headphone
USING AS A WIRED HEADPHONE The Wave can be used as a wired headphone by plugging one end of the included stereo audio cable into the jack on the left earcup and the other end into any audio device with a standard 3.5mm headphone jack. This allows use when the battery is depleted and with devices that do not have Bluetooth (such in-flight entertainment systems) or aren’t paired. -
Page 10: Specifications
Windows® Phone is a registered trademark of Microsoft Corporation in the United States and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners. - Page 11 www.MEEaudio.com support@meelec.com...
Need help?
Do you have a question about the Wave AF36 and is the answer not in the manual?
Questions and answers