ZyXEL Communications ZyAIR G-4100 Quick Start Manual page 25

1. Locate a high position on the wall that is free of obstructions.
2. Use the included screws (or other screws with 6mm ~7.5mm (0.24" ~ 0.30") wide heads). Install
the two screws in the wall 80mm (3.15") apart. Do not screw the screws all the way into the
wall. Leave a small gap between the head of the screws and the wall.
Make sure the screws are securely fixed to the wall and strong enough to
hold the weight of the ZyAIR with the connection cables.
3. Adjust the cables.
4. Align the holes on the back of the ZyAIR with the screws on the wall. Hang the ZyAIR on the
screws.
ZyAIR G-4100
Figure 26 Wall Mounting the ZyAIR
25