A&D HL-200i Operating Instructions

HL HL HL- - - - i series Digital Compact Scale HL

Cautions

Cautions
Cautions Cautions
G
Avoid installing the scale in direct sunlight.
G
Avoid over / shock load that could cause damage to the scale.
G
Use the scale under conditions of -10°C to 40°C, less than 85% R.H.
G
The weighing pan cannot be removed. Do not pull on up it.
G
Do not mix the battery types. Replace all of the batteries at same time.
G
If the scale is not to be used for a long period of time, remove the all batteries.
G
Use only the specified AC adapter for the scale (AC adapter is optional).

Specifications

Specifications
Specifications Specifications
HL-200i
HL-2000i
Power
Battery life
Pan size
Dimensions

Keys and Symbols

ON:OFF
key
RE-ZERO
key
UNITS
key
Symbol STABLE £ Indicates when the reading is stable.
Symbol ZERO

Installing batteries / Connecting the AC adapter

Installing batteries / Connecting the AC adapter Installing batteries / Connecting the AC adapter Installing batteries / Connecting the AC adapter
Installing / Replacing Batteries Installing / Replacing Batteries Installing / Replacing Batteries Installing / Replacing Batteries
Remove the battery cover and insert 4 batteries (AA size)
into the battery housing, especially take care of the
polarities. Attach the battery cover again.
AC adapter (optional) AC adapter (optional)
AC adapter (optional) AC adapter (optional)
Peel off the seal on the battery cover to thread the
AC adapter wire through. Plug the AC adapter to
the AC adapter jack inside the battery housing.
Attach the battery cover again.
series Digital Compact Scale series Digital Compact Scale series Digital Compact Scale
Operating Instructions Operating Instructions Operating Instructions Operating Instructions
200 x 0.1 g / 7.05 x 0.01 oz / 1000.0 x 0.5 ct / 5.335 x 0.005 tl
2000 x 1 g / 70.5 x 0.1 oz / 4 lb 6.6 oz x 0.1 oz / 53.35 x 0.05 tl
4 x "AA" size batteries (monitor batteries included) or AC adapter
Approximately 1000 hours with alkaline cells at 20°C / 68°F
130 mm /
130 (W) x 192 (D) x 51 (H) mm / 5.1 (W) x 7.6 (D) x 2.0 (H) in
Turns the scale power on/off.
Sets the display to zero.
Changes weighing units.
!
Indicates when the scale zero is correct.
5.1 in.
Peel off the seal here
AC adapter jack
Battery cover