Related Manuals for SATO CL4XXe
Summary of Contents for SATO CL4XXe
- Page 1 ® CL4XXe Rotary Cutter Installation Procedure SATO America, Inc 545 Weddell Drive Sunnyvale, CA 94089 Main Phone: (408) 745-1300 Tech Support Hotline: (408) 745-1379 Fax: (408) 745-1309 Proc 52...
- Page 2 Sato Industrial Bar Code Printers Label Cutter Kit Installation - Rotary Type STEP PROCEDURE .igs. 6-1 RAISE THE TOP ACCESS DOOR AND REMOVE (2) SCREWS HOLDING THE SIDE COVER TO THE FRAME ELECTRONICS REMOVE SIDE COMPARTMENT COVER REMOVE (2) SCREWS...
- Page 3 Sato Industrial Bar Code Printers Label Cutter Kit Installation - Rotary Type MOUNTING BRACKET REPLACEMENT LUBRICANT DOOR CABLE HOLD DOWN (2) SELF TAPPING SCREWS CABLE LABEL CUTTER ASSEMBLY ROTARY LABEL CUTTER KIT STEP PROCEDURE .ig. 2 .ig. 3 .igs. 3 & 4 .ig.
- Page 4 Sato Industrial Bar Code Printers Label Cutter Kit Installation - Rotary Type STEP PROCEDURE .ig. 10 .igs. 11. .ig. 12 .igs. 1 REMOVE FRONT DOOR FROM CL4XXe PRINTER Fig.2 Page 4 CL4XXe Rotary Cutter Installation...
- Page 5 Sato Industrial Bar Code Printers Label Cutter Kit Installation - Rotary Type LOCATION FOR MOUNTING PLATE REMOVE LATCH AND STAY SET ASIDE SCREW FOR ATTACHING CUTTER REMOVE AND SET Fig. 3 ASIDE (2) SCREWS FOR ATTACHING MOUNTING PLATE FASTEN MOUNTING...
- Page 6 Sato Industrial Bar Code Printers Label Cutter Kit Installation - Rotary Type CUTTER PC BOARD KEY SLOTS Figs. 6 KEYS INSTALL SUPPLIED CABLE TO CUTTER PC BOARD AS SHOWN. KEYS ON CABLE CONNECTOR DO NOT PREVENT INCORRECT CONNECTION. HOWEVER, THE KEYS ARE PROVIDED...
- Page 7 Sato Industrial Bar Code Printers Label Cutter Kit Installation - Rotary Type LOOSEN TWO SCREWS/RETAINERS AT THE BASE OF THE CUTTER SLIDE THE CUTTER INTO POSITION ON THE MOUNTING PLATE AND SECURE WITH SCREWS/RETAINERS Figs. 8 ATTACH CUTTER TO THE...
- Page 8 Sato Industrial Bar Code Printers Label Cutter Kit Installation - Rotary Type AFTER THE CABLES HAVE BEEN PROPERLY DISCONNECT THE ROUTED AND ARE CONNECTED, SECURE CABLE FROM THE THE CABLES TO THE PRINTER WALL WITH DISPLAY PANEL CABLE HOLD DOWN SUPPLIED IN THE KIT PC BOARD.