Working Instruction, Mechanical
2.1.6 Lower Rear Cover Assembly (and Main PBA)
Start like this before removal of the lower rear cover
assembly.
Gently bend with the front opening tool under the main PBA
like the picture shows until the main PBA starts to become
loose on this side of the lower rear cover assembly.
If necessary do the same thing on the other side.
Start to remove the main PBA.
If necessary, wiggle the main PBA a little side to side while
pulling it away from the lower front cover assembly.
Remove the main PBA completely from the lower rear cover
assembly.
3/000 21-1/FEA 209 544/104 C
16(87)
©
Sony Ericsson Mobile Communications AB