Working Instruction, Mechanical
Reassembly Instruction continued
Make sure that the two snap fit hooks in the upper front
assembly complete are locked against the upper carrier
assembly.
±
A
PPLY 15 NCM
1.5 NCM OF TORQUE FOR THE SCREWS USING
(
)!
NTZ 112 288
TORX BIT NO 6
Assemble and tighten the two screws in the upper carrier
assembly.
Replace the screw if it's damaged otherwise it can be
reused.
3/000 21-1/FEA 209 544/104 C
82(87)
©
Sony Ericsson Mobile Communications AB