Working Instruction, Mechanical
Replacement Instruction continued
Remove the main flex assembly with the flex film assembly
tool.
Start to reassemble a new main flex assembly.
Make sure that the main flex assembly is assembled in the
right position (use the guide pin).
Gently fold the flex film into the correct position.
Check that all of the flaps on the main flex assembly are
correctly assembled (use the guide pins by the arrows).
Follow the 4.1.1 – 4.1.8 Reassembly instructions!
3/000 21-1/FEA 209 544/104 C
©
Company Internal
Sony Ericsson Mobile Communications AB